Hi there, new-(ish) here
I need to source this clip which works with a G4 LED Holder, traditionally used to hold glass diffusers in cable lighting systems. I'm specifically looking for the metal wire clip which can be fixed to the holder.
If anyone has any idea would be great to hear !
Thanks !
Similar to this fitting, but at Ø14 / Ø15mm https://files.engineering.com/getfile.aspx?folder=fa2e3efb-b6c8-4130-bd6b-2ea2cfcd6970&file=Screenshot_2019-02-07_at_09.56.19.png
Hi there,
I'm doing a project whereby I need Ø14mm / Ø15mm Steel or Aluminium T-joints where the branch is at 45 degrees to the other two.
Does anyone have a good source of simple tube joints / connectors etc? I don't want to go down the route of notching tubes, but would prefer a push fit...
Thank you both for the feedback — I've written to EMUGE to see if they're able to help with a custom tap.
I'm designing a lighting system and want to be able to tap the tubing myself and screw the glass in.
I can probably design the glass with a fixture that doesn't require a screw thread but...
Hi all,
I'm working on a current project whereby I need to find or make a tap that can connect the Knuckle Thread DIN 168 especially for glass containers (male) to a tapped nylon / steel with the correct counterpart.
I've searched all over for a conversion from Knuckle Thread DIN 168 (GL)...
