Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by cvkushe

  1. cvkushe

    I need the shrink factor..

    considering the bowl shape & wall thickness i guess the gating u will consider for this part will be direct kind i.e. either cold sprue(normal) or hot sprue type(with PE this will pose difficulty need to check for flow of 0.4) One noticeable point in this regard : if the part geometry is in...
  2. cvkushe

    autocad for molds?

    HI Smoke! Autocad is ok when considering 2d drafting of mould views. But 2D by its very nature restricts foreseeing of structure related problems in the mould. I have been using Pro/E for past 7 years for plastic part & mould design. Have also used I-deas , SolidWorks & CATIA(to some extent...
See more

Part and Inventory Search

Back
Top Bottom