Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by Curiosity saves the cat
-
Selection of cable (voltage grade) for 230/34.5kV Trafo neutral to Ground connection (Solidly ground
On the contrary, I thought that since it is connected to trafo neutral, it has to be rated for L-N voltage of sec. of trafo, since during the L-G fault, the potential of the N would rise to that value, hence, cable should be rated for this voltage. This is also being followed for the NCTs. -
Selection of cable (voltage grade) for 230/34.5kV Trafo neutral to Ground connection (Solidly ground
Dear Team, I wanted to confirm the voltage grade for the cable to be used for connection of the 230/34.5kV transformer neutral to ground for solidly earthed system. Should the cable be rated for 36kV? Thanks in advance- Curiosity saves the cat
- Thread
- Replies: 2
- Forum: Electric power & transmission & distribution
