Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations Ron247 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by CRAMETAL

  1. CRAMETAL

    Weld Overlay / Stress Relieving

    Hi SJones, Thanks for your response. Yes, the hardness shall not exceed 250 HV.
  2. CRAMETAL

    Weld Overlay / Stress Relieving

    Thanks to all. Hi Metengr: The Service Application: Sweet and wet Sour Gas service Design Code: B31.8 Hi EDStainless: We will get the flange (API 10M) weld with A694 transition piece (both carbon steel) and stress relieved from one vendor. Then it shall be cladded interanlly (inconel) by...
  3. CRAMETAL

    Weld Overlay / Stress Relieving

    Hi Gents, We have AISI 4130 Flange welded with a pipe (P1 group material 25 mm WT) and stress relieved. Is it acceptable to clad internally with Inconel 625 by weld overlay on stress relieved spool? Can any one please advise on the WPS / PQR requirement? Thanks!
See more

Part and Inventory Search

Back
Top Bottom