Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by confusedchamp

  1. confusedchamp

    High Inlet Line Loss In PSV

    Thanks all for the timely advice. Well i posted the same in other blog and got some leads about the problem. The PSV selected orifice size is D with area 0.11 sq. in. Now i was trying to take 1/4in line to 3/4" line in calculating pressure loss. As per API and ASME, the inside dia of all the...
  2. confusedchamp

    High Inlet Line Loss In PSV

    Stuck at dead end for high inlet line pressure loss. The relief valve is located downstream of a pressure regulator. The regulator failure is the governing case and API orifice D is what is required for this case. Now problem is the downstream line size of regulator is 1/4". Considering the...
See more

Part and Inventory Search

Back
Top Bottom