Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by ChRe007

  1. ChRe007

    Maximum actual velocity of 400 psig steam from a 10 inch nozzle in 12 inch pipe

    I appreciate your reply, Latexman. I just heard about required steam flow rate to Unit A is 90,000 lb/hr. So, The problem statement we are trying to determine is: we need 90,000 #/hr of 400 psig steam, will it fit through a 10” line, what is the anticipated velocity and will it exceed some...
  2. ChRe007

    Maximum actual velocity of 400 psig steam from a 10 inch nozzle in 12 inch pipe

    Thank you for your time. There is a 12" Schedule 40 piping existing and currently supplying to Unit B (to existing process units) with 400 psig steam. We are planning a new Unit A which is trying to use some of this OSBL (out side battery limit of process units) steam supply. There is a 10 inch...
  3. ChRe007

    Maximum actual velocity of 400 psig steam from a 10 inch nozzle in 12 inch pipe

    I am trying to calculate maximum velocity/ flow rate (choked) of 400 psig steam in a planned 10 inch Nozzle for unit A steam supply from an existing 12 inch 400 psig steam supply line to unit B in Tee connection. I am using 400 psig inlet/outlet steam pressure in 12 inch steam supply existing...
See more

Part and Inventory Search

Back
Top