Sanket123,
Never mind, I found what you were telling me to do. In Tools>Options in the lower left corner, the reset parameters icon. Yeah, that didn't work. Even when I went to the Customize area and restored all icon positions it still didn't reset. I have no idea why this is happening...
Hi sanket123,
Thanks for the help. I'm not sure what you mean by your first step.
"click the home setting at option and select <restore parameters value to default one > found at the extreme lower right corner"
Home setting at option? Is this in Tools>Options? Where is the Home setting...
I had Catia installed and running fine, when one day I noticed my Sketcher Icons were out of place, or not where they're known to be normally. This was the case for my R17 and R18 installation. I uninstalled Catia completely from my machine, folders, CATSettings folders, everything. I then...
Be sure you're at the top level. To do that, double-click on the top level assembly in the Sec. Tree. To make a component active, let's say you have a Product called "Assy", and three parts under it, "A", "B", and "C". To activate part "A", hit the plus sign beside the "A" and double-click on...
Had you taken the original CATPart and modified it, then done a SAVE AS to a new part number, what you tried to do would have worked. Or if you used a part that was a part of a Design Table group of parts, you'd have also been able to do that. Each Catia part has a UUID I think it's called...
Are you copying and pasting within the same CATDrawing file but on Sheet.2 or Sheet.3 for example? If this is the case, then for sure you'll get the [2] because Catia needs to differentiate the two Details. If you're copying from one CATDrawing to another CATdrawing, that doesn't seem to...
Use the Edit>Search command to search for particular features in the Spec. Tree. You can search for specific Features, parts in a Product, parts based on their colour, etc... Use the HELP docs for further information.
