hi cncprogrammer
I will try fanuc for a manual. I have been leaving out the O in the program number ie :ooo1 for instance that useually works but haven't subtituited the a zero for the O. i also down load everything from memory this sometimes fixes it.
Thanks best regards Burgy
hi cncprogrammer
No specific alarms I have only had the machine about a year and every now and than an alarm will come up and I have no reference for it. Usually I get alarms when loading code from the PC to the machine. Sometimes I only get abit of the program and an alarm comes up also.
Best...
Dave
I maintain a small fleet of drills for a customer. Repairing and updating as required. He has recently changed from NW threads to this new thread and he wants me to make the rods subs ect.
I am in the process of manufacturing a new gearbox and modifying the other gearboxs to the tapered...
Hi Kingsland
surfed up and down the net and found NWJ and it is used with 2 5/8" rods which all looks good. Now I only have to find the dimensions.
Hi tried emailing drill suppliers for information but no replies as yet. NWJ sounds interesting at least it is one I haven't heard of yet. Does flush joint mean the same as shoulder joint. I do know from past experience the shoulder joint has to be in correct location to the thread otherwise the...
Spoke to customer today and he believes the thread is a standard thread. The drill steels are 2 5/8" diameter and the drills are used for exploration use road work subdivisions etc. Core drilling. From the information you have given me at least eliminates NC23. We have tried one bit...
I am looking for specifications for 2" 4 TPI 10 degree tapered drill rod joints very similar to API but cannot find dimensions for 2" Have reference to a NC thread in tool suppliers catalougue but angle is wrong as well as diameter. Length of thread is 2" I have measured off a...
