Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by brcuzz

  1. brcuzz

    Towing Disaster

    Caster wheels in the rear is unstable. It's the same as pushing a shopping cart backwards.
  2. brcuzz

    Question on construction of cut slopes

    While driving the highways and byways of our great nation, I've been marveling at how smooth, planar, and plain these steep slopes are, cut into native soil and rock. The gradients are, to my understanding, typically 2:1 or a 50% slope. My question is: How are they constructed? Surely a motor...
  3. brcuzz

    Dewatering drains along roadways

    Questions about the type of dewatering pipes in the photo below: 1. Is there a name for these dewatering taps? 2. How are they installed? 3. Do they include perforated pipe? 4. What is the typical range of insertion depths
  4. brcuzz

    One puzzling valve in a bad copy of a schematic

    OK. Would this be the correct way to diagram it? And is there an ANSI standard for hydraulic schematics? I have not really gotten to the logic part of the project yet, just figuring out what's on paper so far.
  5. brcuzz

    One puzzling valve in a bad copy of a schematic

    So the valve diagram should should be corrected to look like this?:
  6. brcuzz

    One puzzling valve in a bad copy of a schematic

    I'm resurrecting a bad (and only) copy of a hydraulic schematic for a Menzi Muck 5000 T2 spider excavator. It was apparently photocopied while folded, without bothering to unfold it, so the folded regions are blank, forming a thin blank cross on the reconstructed page. I've inserted the missing...
See more

Part and Inventory Search

Back
Top