Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by bogdanm

  1. bogdanm

    Orifice Flowmeter Check

    Hi Sheiko, I should check at least these values: - flatness of the orrice place -edge - should not reflect light -thickness -roughness -angle of bevel -concentricity - diameter Keep a record of all those values. If some of them are out of the limits then you should replace or send the...
  2. bogdanm

    FLOW CONDITIONING FOR TURBINE METERS

    You can't replace the pipe using the straighten plate. All you can do is to reduce the lenght of this pipe, i.e 7 diameters upstream and 3 downstream, depends who is you turbine supplier.
  3. bogdanm

    Natural Gas Metering Options

    I'm working in the Natural gas metering field,and I can tell you in this way: the pressure that you have it is to low to use a Coriolis meter or an ultrasonic meter. At this pressure,I suggest you to use a gas turbine with a flow computer (S600 from Daniel is the best I've ever see), tipically a...
  4. bogdanm

    EEx d to EEx ia interface?

    Cludwing, the best advice that I can give you is to ask a specialized company. Take a ride on www.ehawke.com,maybe they will can help you
  5. bogdanm

    Supplier of Fiber Glass Internal Floating roof for storage tanks?

    A very good IFR full contact you can find also at HMT.So far as I know, the fiber IFR are the best, but are very expensive.
See more

Part and Inventory Search

Back
Top Bottom