Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Bluzman

  1. Bluzman

    Fan Sizing

    Thanks I well aware see a few post up. Looking at a average summer day 95f so a rise if ten degrees in the room is acceptable
  2. Bluzman

    Fan Sizing

    Willard3 I respect your opinion but.... I may have stated the problem incorrectly lead you down the wrong path, I apologize. I want to limit the rise to 15 degrees. So, for a typical summer looking at 95F, you need about 210 CFM for every KW, therefore, revised heat loss of 220KW gives me about...
  3. Bluzman

    Fan Sizing

    I cannot use anything but ventilation outside air. So what is the solution?
  4. Bluzman

    Fan Sizing

    summer day at 100°F. I HAVE TWO FANS AT 20K CFM
  5. Bluzman

    Fan Sizing

    OK....... It is an electrical room with 3 1900kw VFDs and several MCCs. I have not done this type of calculations in 25 years rusty and not trusty. the VFDs are ~96.5 eff.=66.5kw x 3 = 199500w + other equipment; roughly total 250kw. 250,000 watts is my heat loss from the equipment = 853,035...
  6. Bluzman

    Fan Sizing

    This is from the manufacturer of the vfd plus the other equipment. I have my answer it is about 40000 cfm
  7. Bluzman

    Fan Sizing

    200kw is my heat loss
  8. Bluzman

    Fan Sizing

    I have a room I need to cool 5-10°F, using outside air only. The volume of the room is 20,000 cuft. The heat load is 200KW. What is the CFM of my fan?
See more

Part and Inventory Search

Back
Top