Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by blueranger
-
ABAQUS Coupled Displacement Analysis of Rotors
Terry Thanks for the reply to my post.This is a simulation of a single Vmax Stop (160km/hr) at 1G and the calculated stop time used in the analysis is 4.53secs. Compressive stresses on the rotor swept surfaces are not a concern.The stresses of interest are tensile bending stresses at the 5...- blueranger
- Post #3
- Forum: Finite Element Analysis (FEA) engineering
-
ABAQUS Coupled Displacement Analysis of Rotors
I would be interested in the opinions of some of the resident experts regarding this issue. I have carried out Coupled Displacement analysis of a Brake Disc Rotor (material is Grey Cast Iron) in ABAQUS using a solid 3D model of the Brake Rotor in isolation.This means that i have used coupled...- blueranger
- Thread
- Replies: 4
- Forum: Finite Element Analysis (FEA) engineering
