Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by blueearth99

  1. blueearth99

    Is this sampling method tighter than before?

    Thank you Dennisp you are right,fix the machine is the better way. we have had a plan to get a new more stable machine.
  2. blueearth99

    Is this sampling method tighter than before?

    Thank you ajack1. Our machine is not very stable,so I want to ask them to tight the inspection.
  3. blueearth99

    Is this sampling method tighter than before?

    Original sampling method : every batch (100 samples) select 5 to inspection. New sampling method : every batch (20 samples) select 2 to inspection. Is new sampling method tighter than original one? Why?
  4. blueearth99

    GRR and Set-Up Process

    Hello weisusu 1)For perform a GR&R.The test samples diameter should distribute equality over the whole Tolerance.And It is better to have 10 samples.So in your case,may be you need 10 samples size form 0.299992,.......to 0.30007 which are distribute equality between 0.30000(+/-0.00008) 2)%GR&R...
  5. blueearth99

    How do the polish parameter affect the optical connector's geometry

    Hello Everyone, I am try to understand How do the polish parameter(use Polish machine,Polish Jig,polish Pad) affect the optical connector's (SC,LC)geometry (Curve of Radius,Apex offset,fiber protrusion). I have done some test and got some result,but do not sure they are right or not. 1.Hardness...
See more

Part and Inventory Search

Back
Top Bottom