Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by bengoali
-
Critical Pressure, Maximum Pressure Drop Across Valve, Sonic Velocity, Maximum Exit Velocity
After the expander there is a chamber. Based on the other process data, I do believe its barg and not bar abs. We use a software which uses the IEC 60534 standards to calculate the required CV for flow cases, noise predictions and also the CV of the valve. Noise isn't much of a concern in...- bengoali
- Post #5
- Forum: Pipelines, Piping and Fluid Mechanics engineering
-
Critical Pressure, Maximum Pressure Drop Across Valve, Sonic Velocity, Maximum Exit Velocity
Hello Guys, Recently join this community as I saw some really helpful posts. I've come across a control valve problem which has really high flow requirements. The process conditions are as follows: p1 = 10.3 barg p2 = 1 barg Q = 2,000,000 kg/hr k = 1.403 M = 28.97 kg/kmol Z = 1 T = 65...- bengoali
- Thread
- Replies: 4
- Forum: Pipelines, Piping and Fluid Mechanics engineering
