Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by atmal

  1. atmal

    Fusion Welding

    Thank for the response. Based on cycle time cooling is not viable. Any other suggestions?
  2. atmal

    Fusion Welding

    I am fusion welding a rail that is approximately 8ft long. It has multiple components being welded with approximately 118 fusion welds. The parts are all within tolerance and I am welding from one end to the other. I find that the part is reaching thermal expansion. What is the best way to...
  3. atmal

    Molding Platable Plastic Parts

    1. Tighten your parameters 2. Look at re-grind 3. Do a conductive study of parts on which plating is not adhering to plastics 4. Look at suppliers control plant and PSMEA 5. Conduct a study sending different batches of material. If plating adheres to all then point finger at supplier
See more

Part and Inventory Search

Back
Top Bottom