Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Arys13

  1. Arys13

    Airfoil trailing edge

    Hi, I'm trying to simulate an airfoil in Fluent, and I'm working with airfoils of the NACA 65 series, which are very thin. The problem is that this airfoils become incredibly thin at 90% of the chord length or sooner ( < 0.8 mm of thickness), a geometry that would be impossible to fabricate...
  2. Arys13

    Naca 6-series nomenclature

    I've also found NACA reports using this nomenclature... http://naca.central.cranfield.ac.uk/reports/1958/naca-report-1368.pdf e.g. NACA65-(27)10
  3. Arys13

    Naca 6-series nomenclature

    Well, I've found several reports that use that nomenclature. For example: http://hal.archives-ouvertes.fr/docs/00/56/52/34/PDF/Article_preprint.pdf (To search quickly, control+f and search for "xx") As it says on the reference: Profile designation according to the nomenclature given in...
  4. Arys13

    Naca 6-series nomenclature

    I've already checked that. It's useless since I don't know the correct nomenclature for the airfoil.
  5. Arys13

    Naca 6-series nomenclature

    Hello, I'm trying to draw in CAD a NACA airfoil, but I'm having problems with the nomenclature. The information I have is: NACA 65(xx)(yy) (e.g. NACA 65(07)07) With xx standing for the relative camber and YY representing the relative thickness (that's what the information about the airfoil...
See more

Part and Inventory Search

Back
Top