911turbowing,
When you try to use the Circular Pattern function, use the BODY as the object to pattern, not a specific feature like a pad or fillet or chamfer. This is important. If you make your propeller blade with Fillets or Chamfers on it, they will be included in the replication because...
Puck, allow me to answer this one ...
911turbowing, you don't make the shaft and the blade into one part until you have created the other blades. Use Define in Work Object for the body with the blade in it. Perform a Circular Pattern with the body as the Object to Pattern. You can do a...
Hi, All.
This should open up a can of worms. For you aerospace guys (others may respond as well, but this is more of an industry issue), how do you normally represent rivets? The way I see it, we have several options:
a) Show only the point
b) Show only the centerline
c) Show only the...
stickybunn,
Sorry to hear about your issue. Following my instructions, the people in my company have had no issue. The X direction runs left to right. You might want to try again with those vectors? Just experiment to see if you can get a different orientation, even though it is incorrect...
stickybunn,
I work in the aerospace industry and what Dassault did makes no sense to me either. There is what I was able to do.
Go to the View pull-down menu and click on Named Views. Select *iso in the list and click on the Apply button. Your Compass will rotate to that whacked view. Now...
friedrich,
If you are up to speed on PowerCopy and Catalogs, this is the route you might want to take. I would make a PowerCopy of the part and place it in a catalog. In the catalog, you can resolve the part families, which will give you a part document for each configuration. Then, you...
AXXX,
I have done what you mention, but to no avail. I believe I will literally need a step-by-step after you change the size, because I have never had success in this area.
Thanks.
AXXX,
I have done things like you suggested before. What I'd like to do is specify the size of the capture, like 2" x 2" or 400 x 300 pixels. I'd rather do things this way than have to keep going to other graphics programs and cropping my images, which I have been doing. I use Capture and...
Hi,
Does anyone know if it is possible in V5 to make a fixed-size screen grab? I have been up and down the Tools > Image > Capture and can't seem to get anything to happen.
Thanks.
CSrac,
There is two ways I have typically handled this situation.
One is make a new column in my Excel spreadsheet and perform my operation there. For instance, you could make a column LARGE RADIUS A (in) and have all the values in that column equal to the Diameter A/2. Then you could...
I have locked the position of the toolbars in v5r10 and it will still take some of my toolbars and throw them off-screen. I have to unlock the toolbar position ever time I start up v5 and reposition some of my toolbars. This is VERY annoying.
Turned off the "load extended language libraries" option but have not seen any significant improvements on restart. Is there anyhing else I can do?
Thanks, Stefan.
