Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by anmorgan

  1. anmorgan

    Question about importing polygon model from something like Maya to Solid Edge

    Hello, I was wondering if there is a way to import a model from a program like Maya and use it in Solid Edge. I know you can do .stl's but they cannot be edited or manipulated once in Solid Edge. Therefore I am wondering if there are any methods of saving to a format that can be edited, even if...
  2. anmorgan

    Help with Parallel Computing on multiple remote computers

    Hello, I have used the Parallel Computing Toolbox very minimally and am having troubles finding information on how to use it with other computers besides local. It is easy enough to use on a local machine, but I cannot find any straight forward generic guides on how to do it remotely with other...
  3. anmorgan

    Constraints in NX 7.5

    That was it, still not completely familiar with all the nit-picky stuff. thanks for the help. (sorry for the lack of initial explanation)
  4. anmorgan

    Constraints in NX 7.5

    How do I constraint something like the endpoints of an arc onto a part of a spline that is in that sketch plane, as seen in the attached picture?
  5. anmorgan

    NX 5 and Inte HD Graphics problem

    sorry about double post, didn't mean to do that
  6. anmorgan

    NX 5 and Inte HD Graphics problem

    I understand this, like stated before, I did not get to choose this laptop, as it was from my boss. Where that CAD is for school and not my job :( But changing the reference sets seems to resolve my issue, I just hope I don't have to do it to everything I load.
  7. anmorgan

    NX 5 and Inte HD Graphics problem

    I understand this, like stated before, I did not get to choose this laptop, as it was from my boss. Where that CAD is for school and not my job :( But changing the reference sets seems to resolve my issue, I just hope I don't have to do it to everything I load.
  8. anmorgan

    NX 5 and Inte HD Graphics problem

    Thanks for the input but as stated before your post, when I right click a part and go to "Replace Reference Set" -> FACET it resolved the issue but I dint know why and how to apply it to everything
  9. anmorgan

    NX 5 and Inte HD Graphics problem

    So changed my reference set for the model to FACET and it was able to render it properly. Do you have an idea why that would be?
  10. anmorgan

    NX 5 and Inte HD Graphics problem

    Any help or attempt at that is appreciated, thank you very much. You are always helpful!
  11. anmorgan

    NX 5 and Inte HD Graphics problem

    unfortunately that did not resolved the issue. I will check out the GTAC site, unfortunately I did not get to choose this laptop, so I guess I'll see what we can do.
  12. anmorgan

    NX 5 and Inte HD Graphics problem

    I just got a laptop that has an Intel HD Graphics card. I can run NX, but when I load parts, the are chopped up and not display properly, see attached picture. http://files.engineering.com/getfile.aspx?folder=4e0b8f77-9553-4ba0-a0fc-b01a9cb5cc89&file=NXgraphicsproblem.jpg So I dont know if...
  13. anmorgan

    Accessing a License outside of a network

    Okay, yea I'm just trying to understand it better so I'm prepared when I contact GTAC for help. Thanks!
  14. anmorgan

    Accessing a License outside of a network

    So how does another computer actually obtain the license information. Does it use the licensing software, such as LMTOOLS or does it just need the environment variable to be pointing to it port@hostname? That is where I am confused, if LMTOOLS plays a role in another computer accessing the...
  15. anmorgan

    Accessing a License outside of a network

    I tried asking this before, but don't think I was clear enough. So here it is again: I have a computer that has the license file on it and is the server. I have another computer on the SAME network that points to that file and works fine. Does anyone know how to properly configure the LMTOOLS...
See more

Part and Inventory Search

Back
Top