Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by AliZK

  1. AliZK

    Pillow Bearing Needed

    @dvd Thank you for the help. I have just contacted them. @romke The problem is due to over heating. at temperatures of circa 500C. The bearing itself cannot withstand high temperatures. that is why I am looking for the ones which can withstand these high temperatures. It is located in the dryer.
  2. AliZK

    Gypsum/Plaster Factory

    @latexman no, the density does not matter whatsoever in the final product. @bimr fair enough, but different compositions have different effects on the board. let's say the moisture level, the bonding of the board, the flexural strength. lots of factors can get affected due to variation of the...
  3. AliZK

    Gypsum/Plaster Factory

    @mbt22, the CEO of the company is an old wise man. let's just say he is a family friend. the more I tackle a problem the more I make the CEO happy. thus, my parents happy. and there's nothing like the feeling of your own family being proud of you. even though it's a minor issue. but small things...
  4. AliZK

    Gypsum/Plaster Factory

    well depending on the production plan. currently they are on the 1200mmX2400mmX12.5mm. they do have other boards such as the 1220mmX1830mmX12.5mm. All I could think about is that if they are planning to produce the 9mm or the 7mm, the amount of additives should also be different, is it not...
  5. AliZK

    Gypsum/Plaster Factory

    I have been working in this factory for a few months now. I am a fresh graduate. so by all means I do not have any authority what so ever. The factory produces about 30k sqm of boards per day. what really irritates me is that the "superior" people here are using sqm/minute. I have never seen...
  6. AliZK

    Pillow Bearing Needed

    I am searching for a pillow block bearing that is similar to the UCP 314 FYH which withstands temperatures to about 500C of heat. Please refer me to the manufacturer as the current bearing I am using is the UCP 314 and it gets damaged every few weeks. Thank you for you attention.
See more

Part and Inventory Search

Back
Top