Where can i find info on how to use hysis, since i am new user. I would appreciate if someone could send me a link on a webpage describing how to get started with hysis-
Thanx.
Hi,
I have a qestion regarding the ammonia refrigeration section. specifically ammonia refrigeration compressor vs the capacity of ammonia condser.We are using cooling water in the ammonia condenser. However, we are experiencing much heavier load on ammonia compressor in the summers compared...
Hi,
We have experiencing slightly higher vacuum in our surface condenser. Design 0.24 bar abs and at the moment 0.40 bar abs.
Is it because of higher inert concentrations in the HP steam. Can we reduce the vacuum to around 0.3 by opening SU ejectors!
Thanx
Thanks for the reply.
The LP steam that is is injected into the deaerator is as I impose and you have explained controled by a PIC-controller. However, if the amount of LP steam is too high, the high vent flow will increase. The orifice for the steam vent is normally designed for max flow 2000...
Hi All,
I am working in a project on a boiler feed system for a hydrogen plant.
We are using LP steam as injection instead of a coil inside the deaerator. I want to know whether the amount of LP steam injected to the deaerator determines the pressure inside the deaerator and thereby the...
Hello All,
I am an chemical engineer from EU and i am interesed in how to find job databases or companies in the gulf and arab emirates (bahrain, abu dhabi..). I have worked in the petrochemical industry (design and operationn) for 8 yrs.
I would very much appreciate, if someone knew such...
