Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by alanled

  1. alanled

    Can't select a face in an assembly

    I had a similar problem sometime ago I ended up closing the application and re-opening and that seemed to cure it.
  2. alanled

    Nvidia Quadro FX4000

    Be careful with second hand or ebay cards, Ive had 2 from ebay the first a quadro fx1000 lasted 1 day!!! and the second a fx2000 has been better, but has started to go funny tis last week causing strange fatal errors and blue squares all over the screen!!
  3. alanled

    mating problem

    THATS REALLY CLEVER!! MANY THANKS
  4. alanled

    mating problem

    I have a slide moving up and down in the vertical plane held with limit mate ( 0-500mm). I have another slide in the horizontal plane. I want to be able to control the movement of the horizontal slide when draging the vertical slide up and down (visa versa), basicly when the vertical slide is at...
  5. alanled

    CSWP Exam

    Thanks Scott.
  6. alanled

    Spaceballs (3d mouse)

    Ive been using my spacepilot for about 12 months now and just love it, best buy Ive had!!!!
  7. alanled

    CSWP Exam

    I have my CSWP exam in a couple of weeks, If anyone has any tips I would really appreciate them. Im working through my training manuals but if theres anything else I should be doing please could you advise me. Many thanks.
  8. alanled

    moving holes etc in autocad 2007 3d

    Im a bit rusty at autocad 3d and was wondering if it is possible to move holes etc after they have been drawn to save you having to redraw
  9. alanled

    Space Pilot with Autocad 2007

    As you'll probably see the thread says "spacepilot with autocad 2007". As it happens Ive sorted the problem now, thanks for your interest though.
  10. alanled

    Space Pilot with Autocad 2007

    Iam having alot of trouble getting my space pilot to work with Autocad has anyone had the same problems
  11. alanled

    moving freatures to new surfaces

    I use Autocad as well as solid works and was wondering is the a way to move features like holes, extrusions etc to a new face from the one it was originally created on?
  12. alanled

    1500 BAR @20 LPM WATER BASED SUBSEA FLUID PUMP

    cheers, Ive tried them as well! the flow is the problem thanks for your help though.
  13. alanled

    1500 BAR @20 LPM WATER BASED SUBSEA FLUID PUMP

    Many thanks for that, Ive been talking to Marshalsea and they ve been very helpful but the max we can get is 1000 BAR. Funny you mention the Royal Navy because I used to serve onboard HM Submarines but unfortunately the hydraulic pressures were nothing like 1500 BAR, well not on the boats I...
  14. alanled

    Simple question!

    Just a quick one, I thought I would try the CSWP sample exam, Im a bit rusty I admit, no problem with drawing the cplate just a little problem with my rib quantities. I cant seem to get them to rebuild correctly there not reducing in size to accomodate more ribs. any help would be great.
  15. alanled

    1500 BAR @20 LPM WATER BASED SUBSEA FLUID PUMP

    Im lookin for a water glycol based subsea fluid pump capable of generating 20lpm @ 1500 bar, can it be done?!
See more

Part and Inventory Search

Back
Top