Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by aerospace7

  1. aerospace7

    ERROR: OVERCONSTRAINT CHECKS

    Hello to everyone, I modeled two shell elements that have been joined together using a TIE constraint. Now I would like introduce a load on the slave region, creating a reference point, by loading the latter and then using an MPC between the two. ABAQUS exit the Job with several errors like...
  2. aerospace7

    Create a Planar Shell Element

    Hi all, i got a set of closed edges tha lie on a plane. I just wonna know if it is possible create a shell element or a face with this border WITHOUT using the sketch ( couse i got the border, but i can't sketch it, since this border is the result of a...
  3. aerospace7

    SET OF FACES

    nice! thank you very much! this quite solved my problem. But now i have a new issues. This faces in the boc are 4. Now i have to create 24 boxes, in which are contained always 4 faces. i just notice that abaqus gives to this 4 faces index at random, so i cant take always the first 2 faces (...
  4. aerospace7

    SET OF FACES

    hi all, first of all sorry for my bad english. i am finding problems in creating a set with 4 faces. this faces are obtained with the command getByBoundingBox(...). Now the output of this command is a FaceArray object, which is a sequence of Face objects, that i can use for generate a set. I...
  5. aerospace7

    PROBLEMS TO DEFINE SETS

    ok i just solved. thank you very much. it was very easy to fix. thanks again!
  6. aerospace7

    PROBLEMS TO DEFINE SETS

    thank you for the quick response. if i print r i obtain this: print r {0: (mdb.models['Model-1'].parts['Irrigidimenti'].edges.findAt((-263.686745, -56.118384, -378.11608),), (-263.686745321892, -56.1183840614067, -378.11607958443))} Probably the second part of the getclosest() output is what...
  7. aerospace7

    PROBLEMS TO DEFINE SETS

    Hello everyone, I am new to the site and I have a little problem to define the set with Abaqus. My aim is to generate a script for automatic generation of stiffeners in a fuselage. After scoring the geometry would like to create a set for each stiffening (the number of which is parameterized...
See more

Part and Inventory Search

Back
Top