Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by aeboli

  1. aeboli

    SW SKETCHES WILL NOT SHOW

    Hello, I am working on a model in solidworks but i cannot get my sketches to show. The model contains XOR features and graphic scan data. I dont know if this is causing my problem but i know scan data can affect graphics. I can create sketches and they highlight when i select the sketch in...
  2. aeboli

    Solidworks Rebuild Problem

    There was one error upstream that I resolved. The error was a fillet missing edges that were no longer in the model. This seemed to be where the rebuilding was starting from. After correcting the error, the rebuilding continued. I am using version 2008 SP3.1. I finally bit the bullet and...
  3. aeboli

    Solidworks Rebuild Problem

    The downstream features are not whats rebuilding. It is the upstream features. From the rollback bar up approx 150 features keep rebuilding. This makes no sense because upstream features should not have to rebuild when downstream features are edited.
  4. aeboli

    Solidworks Rebuild Problem

    Supressing the lower features will not work because pretty much all features are dependents and supressing one feature will suppress pretty much everything below it making them un editable. I have traced the problem back to the fillet feature where the rebuilding begins. From there, I tried to...
  5. aeboli

    Solidworks Rebuild Problem

    Hello, I recently completed a solidworks model of over 500 features. I then had to go back and revise towards the top of the feature tree which caused a good bit of errors upon rebuilding. I am still in the process of working my way back through the model but noticed that solidworks keeps...
See more

Part and Inventory Search

Back
Top