Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
abasinger's latest activity
-
abasinger replied to the thread Piston motor speeds.Many many thanks!!
-
Yes, if the displacement is limited to 50% of the standard motor, the power and the torque will be reduced by the same amount.
-
abasinger replied to the thread Piston motor speeds.Got it. I hadnt thought that they just change the piston size. You read my thoughts! Cool that you worked for Cat! So if its indeed 5cc...
-
abasinger replied to the thread Piston motor speeds.
-
-
abasinger replied to the thread Piston motor speeds.Very interesting. Caterpillar part number is a 333-7828, would you be able to find any information on that through your BR connections...
-
abasinger replied to the thread Piston motor speeds.Confident on the pressure displacement and rpm figures- they came from a print sheet of the motor in its rebranded form. I suppose...
-
abasinger replied to the thread Piston motor speeds.Good information, thanks to all. I was able to dig up one more bit of technical info- the motor is rated for 5000 rpm. 5k rpm would...
-
Greetings, I would like to see the thoughts of others on maximum piston motor RPMs. I have a small fixed displacement axial piston...
