Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by 72442

  1. 72442

    Fisher Porter Ftrans to Modbus

    We have remote Fisher Porter Controllers That are Linked to a Modicon Controller in a Control Room Through a Fisher Porter Supervisory P.C Using a Micro Link network. Remote Controllers Use F Trans To Commnicate to the Supervisory P.C. From There It is Modbus to The Modicon P.L.C. The Problem is...
  2. 72442

    Eight Digit Totalizer

    Thanks for the replys. what I did was increment a up counter so that when it reached 65535 it incremented a second counter by one.Then had the HMI multiply the number in the second counter by 65535 and add the first counter value to it.Then set it up so when the value in the second counter value...
  3. 72442

    Eight Digit Totalizer

    Yes, but being new to this I was hoping to get a detailed explanation. As far as I know Proworx NXT is only 16 bit.
  4. 72442

    Eight Digit Totalizer

    I need to program a 8 digit totalizer.I have a pulsed input per 1K gallons.The mech. local totalizer needs to match a remote HMI display (wonderware).When the value reaches 65535 (Modicon PLC) This is where I'm Having Trouble.
See more

Part and Inventory Search

Back
Top Bottom