Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by 48as52

  1. 48as52

    Cathodic Protection for Subsea Structure Piling

    here is no similar prescription for evaluating the surface of the buried end up to a specific depth. Eng Tips Rocks thanks, kk http://cubuilt.com
  2. 48as52

    Is there an effective test method for a large HDPE pond liner?

    On a slightly different tack, we have found water between the HDPE liners on the outside of the pond berm. The pond is 225m x 150m and the water is usually 1.5 m deep, the berm is 2.5m high. I would have thought that any water between the liners would not have gone much above the pond water...
  3. 48as52

    Pressure-Depth Plots

    You really should write the static gradient equation and Bernoulli's equation on a sheet of paper and try to figure out what one has to do Eng Tips Rocks thanks, kk http://cubuilt.com
  4. 48as52

    Security Clearance and Non Clearance Jobs

    I think you're better off sticking with ME, and choosing an energy-related study plan. Eng Tips Rocks thanks, kk http://cubuilt.com
  5. 48as52

    Transmitting Ethernet over 500m underwater

    As for small diameter single or dual fiber, I would call general cable and Corning Cable Systems and discuss your application with one of their engineers. Eng Tips Rocks thanks, kk http://cubuilt.com
  6. 48as52

    Diaphragm wall extension

    I believe the wall toe will be stable, but you still need to check deformation of the wall toe. You may use 0.5 to 2/3 of the original soil lateral strength Eng Tips Rocks thanks, kk http://cubuilt.com
See more

Part and Inventory Search

Back
Top Bottom