Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SE2607 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cleaning Optical surface

Optical System Engineering

Cleaning Optical surface

by  Mukul99  Posted    (Edited  )
Reflector and lenses(without AR coating) can be cleaned by first washing it by gentle spray of IPA solution ( using syringe) and then using Nitrogen gas to remove the IPA solution.
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search