Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SE2607 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Liquid testing for Vessel catagory A through D jount?

NDE

Liquid testing for Vessel catagory A through D jount?

by  Heo min  Posted    (Edited  )
Hi i just want to clear out whether liquid penetration testing is mandatory requirement for vessel of ASME U STAMP.

I read on the Asme section Viii Para UHA 34
, PT is required on All Welds for the Austeint and Martensite Chor. However i also realized all welds exceed 19mm described in UW 40(f) for Austeint wled.

What i read on the UHA-34 and ask above make me confushed.

So, please let me know clearly PT testing is required for all weld jont for above material or only for one exceed 19mm?

Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search