Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to mapp residual stress to new model in abaqus?

Abaqus mapping

How to mapp residual stress to new model in abaqus?

by  frenky23  Posted    (Edited  )
I need to mapp residual stress from one model that i got to another model that i need to do myself. i made my model and save it all in one folder.then, i wrote in mymodel.inp above step MAP SOLUTION, unbalanced stress=step, step=1, inc=(number of increments from model that i got) and then save it.
opened abaqus comand and wrote [C:\temp>cd C:\"path"] and then abaqus job= "my model".inp oldjob="old model" int, and then happend "Abaqus warning :The .inp extension has been removed from the job identifier abaqus". How to fix this? what did i do wrong? pls help i am new to this
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Top