Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

What is the good practice to prevent or control sulfur dust during loading into ship?

FAQ

What is the good practice to prevent or control sulfur dust during loading into ship?

by  Thamed57  Posted    (Edited  )
Using safe design for the convoyers and ship loader as follows:
1. use of explosion vents in the hopers, silo and ship loader dust collection system
2. use of dust suprission system mainly water spray along the convoyers.
3. use of magnit to remove any metal objects that can cause spark.
4. if sulfur is produced from sulfur unit of LNG process, quality of sulfur should not have Hydrocarbons and fin dust.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top