Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Is there any specification requiring or describing a pre/post vibe to verify structural integrity for a random vibe test flow?

Random Vibe qualification test

Is there any specification requiring or describing a pre/post vibe to verify structural integrity for a random vibe test flow?

by  Saltycuda  Posted    (Edited  )
The current draft of the aerospace test standard, (MIL-STD-1540E) released as TR-RS-2014-00016 also released as SMC-S-016(2014) states in section 6.3.5.3:
Low-level testing shall be performed in each axis before and after the specified vibration tests to detect any structural changes.
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top