×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here
Home > Forums > Chemical Engineers > Activities > Chemical process engineering

Chemical process engineering FAQ Index

FAQ Index

Chemical engineering
FAQ Title Author Date Rating/#
Informative articles freely available online   faq798-1547 mbeychok 4 Jun 09 3.8 / 4
 

Choked mass flow rate of gases
FAQ Title Author Date Rating/#
Mass flow rate of a gas through an orifice during choked conditions  faq798-1196 mbeychok 16 Jul 08 7.6 / 19
 

Cooling towers
FAQ Title Author Date Rating/#
How to calculate cycles, blowdown, evaporation, makeup  faq798-1152 mbeychok 22 Nov 06 7.5 / 30
 

Vapor-liquid separator drum
FAQ Title Author Date Rating/#
Design of a vapor-liquid separator drum (or knockout pot, or flash drum, or compressor suction drum)  faq798-1153 mbeychok 16 Jul 08 7.6 / 38
 

Chemical engineering

Title :
Author :
Date :
4 Jun 09
Rating/# :
3.8 / 4
 

Choked mass flow rate of gases

Title :
Author :
Date :
16 Jul 08
Rating/# :
7.6 / 19
 

Cooling towers

Title :
Author :
Date :
22 Nov 06
Rating/# :
7.5 / 30
 

Vapor-liquid separator drum

Title :
Author :
Date :
16 Jul 08
Rating/# :
7.6 / 38
 

Resources

Engineering Report - Top 10 Defect Types in Production
This 22-page report from Instrumental identifies the most common production defect types discovered in 2020, showcases trends from 2019 to 2020, and provides insights on how to prevent potential downtime in 2021. Unlike other methods, Instrumental drives correlations between a variety of data sources to help engineers find and fix root causes. Download Now
White Paper - Addressing Tooling and Casting Requirements at the Design Stage
Several of the tooling and casting requirements of a part can be addressed at the design stage. If these requirements are not addressed at the design stage, lot of time is spent in design iteration when the design reaches the die caster. These design issues lead to increase in time and cost of production leading to delay in time to market and reduced profits for the organization. Download Now
Close Box

Join Eng-Tips® Today!

Join your peers on the Internet's largest technical engineering professional community.
It's easy to join and it's free.

Here's Why Members Love Eng-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close