Aerospace Sheet Metal Design - Joggle Standards
Aerospace Sheet Metal Design - Joggle Standards
(OP)
Can anyone tell me what the values in the joggle compensation standards table for "METHOD 1" are used for?
There are 6 values: C1-C5 and Ra. I know what C1 and Ra do but C2-C5 are a complete mystery.
Thanks
There are 6 values: C1-C5 and Ra. I know what C1 and Ra do but C2-C5 are a complete mystery.
Thanks





RE: Aerospace Sheet Metal Design - Joggle Standards
RE: Aerospace Sheet Metal Design - Joggle Standards
RE: Aerospace Sheet Metal Design - Joggle Standards
RE: Aerospace Sheet Metal Design - Joggle Standards
rickbr84NOSPAM@XYZyahoo.com
Thanks Jim.