IEC 61363-1
IEC 61363-1
(OP)
Dear Colleagues,
for the first time I must carry out a short circuit calculation for an off-shore plant.
Usually I base my calculations on the IEC 60909, but this is not applicable in this case, as clearly stated in the first chapter.
I must apply the IEC 61363-1 but my software does not implement it.
Taking into account the very short time to produce the report, I need a fast and effective solution.
What could you suggest me?
Is there a FREEWARE that can help me?
Any experience on the matter?
Thank you in advance
Alex68
for the first time I must carry out a short circuit calculation for an off-shore plant.
Usually I base my calculations on the IEC 60909, but this is not applicable in this case, as clearly stated in the first chapter.
I must apply the IEC 61363-1 but my software does not implement it.
Taking into account the very short time to produce the report, I need a fast and effective solution.
What could you suggest me?
Is there a FREEWARE that can help me?
Any experience on the matter?
Thank you in advance
Alex68






RE: IEC 61363-1
http://www.etap.com/shortcircuit.htm
http://www.ceerelays.co.uk/iec61363.htm
http://skm.com/products/study_modules.htm
RE: IEC 61363-1
RE: IEC 61363-1
Alehman, (perhaps we two have the same name) I already know the commercial products and they cost a lot.
ijl, this is a very good idea because my client is ABB!!
I will try to ask the prg.
Thank you again
RE: IEC 61363-1
RE: IEC 61363-1
I will ask.
Thank you
RE: IEC 61363-1
RE: IEC 61363-1
Bart Zuidema