creating woven / braided metal tubes from wires
creating woven / braided metal tubes from wires
(OP)
Anyone have a good idea on how to create braided hoses in Solidworks? It would seem that using simple circular patterns may accomplish it, but I haven't had much luck so far.
FYI, a braided hose looks kind of like those "Chinese finger handcuffs" that we all played with as kids. Remember those?
Thanks,
FYI, a braided hose looks kind of like those "Chinese finger handcuffs" that we all played with as kids. Remember those?
Thanks,






RE: creating woven / braided metal tubes from wires
Hope this will help,
Scott Baugh, CSWP
George Koch Sons,LLC
Evansville, IN 47714
sjb@kochllc.com
RE: creating woven / braided metal tubes from wires
I think if you are trying to show the actualy braids, it might be beyond SWX at this time, especially if you are thinking about routing this hose up, around and through a part or assembly.
Scott, I'd be interested in seeing what you have. :)
rreynolds@riconcorp.com
"Happy the Hare at morning for she is ignorant to the Hunter's waking thoughts."
RE: creating woven / braided metal tubes from wires
I managed to get the file down to 15.1KB zipped.
Scott Baugh, CSWP
George Koch Sons,LLC
Evansville, IN 47714
sjb@kochllc.com