×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Curved Roof Diaphragm

Curved Roof Diaphragm

Curved Roof Diaphragm

(OP)
I am currently designing a building with bowstring steel joists for the roof. I have a question regarding the design of the diaphragm in the direction of the curve (i.e. lateral load is along the curve). Is a curved diaphragm stiff enough to resist the lateral loads? I see the bottom chords being stiffner (adequately braced) than curved roof. Should I design the bottom chords as a diaphragm or should I use roarke's formulas to determine the shear along the joist's curve? Your thoughts.

This is our first experience with curved diaphragms and we haven't found too much info, any insight is appreciated.

Thanks for your time,
Juan

RE: Curved Roof Diaphragm

I am not sure I understand your "predicament"?  The lateral forces from the top chords will be counterbalanced by the bottom chords in tension.  Diaphragms are used to transfer the shears to the supporting members/structure.  What forces are you trying to restrain? and where?

RE: Curved Roof Diaphragm

I built a cement plant recently with a curved roof. I did some analysis on perpendicular roof loading, but I designed the building with rigid frames at spacings that limited roof shear. I used roof bracing to carry the lateral load, so a curved panel analysis didn't really apply to the barrel. Panel stresses are redundant. This way, you can hedge your bets as far as reliability issues with non-standard construction applications for structural purposes. The brace connections still look conventional. This may help you with conceptual design.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources