×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

random error

random error

random error

(OP)
I'm opening a part now .. ctrl+q and verification on rebuild is on .. no error and no problem ...
close the part , close th sw ..
run sw again .. open part .. rebuild ... ooooh ... errors and errors ..
nothing changed , no hardware , no software .. just 10 second ..
I'm a license user .. so I can't done by kind of cracked group problems ..
so any solution ?

RE: random error

HUH???

Try making steps instead of "..." Your statement is not easily followed.

Quote:

I'm opening a part now .. ctrl+q and verification on rebuild is on .. no error and no problem ...
close the part , close th sw ..

OK I think I followed that?

1) You opened SW
2) done a ctrl-q with Verification of Rebuild on
3) no errors or problems
4) Closed the part and SW

Quote:

run sw again .. open part .. rebuild ... ooooh ... errors and errors ..
nothing changed , no hardware , no software .. just 10 second ..
I'm a license user .. so I can't done by kind of cracked group problems ..
so any solution ?

1) You opened SW again
2) Opened the part - done a Rebuild with (I assume) Verification of Rebuild is on
3) Nothing has changed, but you have errors - What kind of errors??
4) Just 10 seconds - I don't follow this??
5) Your licensed user Ok and??? if your licesnes then call your VAR!
6) So I can't done by kind of cracked group problems .. - why are you telling us this? your the first person to bring it up concerning a crack... ever?

So any solution? yes call your VAR, you are obvisously having a number of issues and you need tech support.

Otherwise try reinstalling your SW FAQ559-908 or cleaing out your Temp FAQ559-884

If it's file sppecific then your going to have to contact your VAR.


The more detail that is provided the better chance you might get of getting an answer.
Regards,

Scott Baugh, CSWP
http://www.3dvisiontech.com
http://www.scottjbaugh.com

FAQ731-376

RE: random error

My first question would be what version of SW are you using?  Then I would have to ask about the hardware specs on the computer you are using.

Quote:

4) Just 10 seconds - I don't follow this??

SWscience saying either he/she waited 10 seconds before opening the file again, or he/she opened the file within 10 seconds.

Ray Reynolds
"Computers in the future may weigh no more than 1.5 tons."
Popular Mechanics, forecasting the relentless march of science, 1949
Have you read FAQ731-376 to make the best use of Eng-Tips Forums?

RE: random error

(OP)
I mean that everyyhings are same , just the time of rebuilding for second time is 10 second after first time , and then some errors apear .
SW 2003 SP 5.1

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources