ASSEMBLY QUESTION
ASSEMBLY QUESTION
(OP)
DOES ANYONE KNOW IF THER IS A WAY TO GET A PART COUNT IN AN ASSEMBLY? I TRIED THE FILE/FIND REFERENCES, BUT ALL THAT DOES IS GIVES ME A HUGE LIST OF ALL THE PARTS WHICH ARE NOT NUMBERED. ANY SUGGESTIONS?






RE: ASSEMBLY QUESTION
Why do you continue to YELL WITH YOUR CAPS ON?
Regards,
Scott Baugh, CSWP

http://www.3dvisiontech.com
http://www.scottjbaugh.com
FAQ731-376
RE: ASSEMBLY QUESTION
RE: ASSEMBLY QUESTION
I hope Tools\Assembly Statistics helped you out.
Regards,
Scott Baugh, CSWP

http://www.3dvisiontech.com
http://www.scottjbaugh.com
FAQ731-376
RE: ASSEMBLY QUESTION
RE: ASSEMBLY QUESTION
RE: ASSEMBLY QUESTION
Most of this in the help.
There are 2 options in Tools\Options that can be set up so Automatic Lightweight is always on, no matter what the Thereshold is.
Tools\Options\System options\Performance\Automatically load Components Lightweight
Tools\Options\System options\Large Assembly Mode\Automatically load Components Lightweight
Regards,
Scott Baugh, CSWP

http://www.3dvisiontech.com
http://www.scottjbaugh.com
FAQ731-376
RE: ASSEMBLY QUESTION
RE: ASSEMBLY QUESTION
RE: ASSEMBLY QUESTION
whispering
Regards,
Scott Baugh, CSWP

http://www.3dvisiontech.com
http://www.scottjbaugh.com
FAQ731-376
RE: ASSEMBLY QUESTION