PMDC Motor
PMDC Motor
(OP)
Can anyone please give me some pointers or links to informative sites on determining/designing the specifications (ie. # of poles, strenth/type of magnet, size/type of wires , etc) for a small brush-type PMDC motor. The motor is supposed to be used as an Anti-Lock brake motor. I figure that a 1/4 horsepower will be sufficient power along with a 12V source (car battery). Any help will be much appreciated.





RE: PMDC Motor
One could easily imagine getting into a collision and the anti-lock being stuck on, so this motor is cranking and sparking while the leaking gas tank dumps gas and fumes...
TTFN
RE: PMDC Motor
RE: PMDC Motor
Can anyone please give me some pointers or links to informative sites on determining/designing the specifications (ie. # of poles, strenth/type of magnet, size/type of wires , etc) for a small brush-type PMDC motor.
///Please notice that the requested content is often part of educational institutions business. Therefore, it is very rarely posted for free. If you have an access to a technical library, there may be some useful books dealing with small PMDC motor designs.\\\
RE: PMDC Motor
http://www.smma.org/
http://www.globalspec.com/FeaturedProducts/Detail?ExhibitID=11204
http://www.knovel.com/knovel2/Toc.jsp?BookID=569
http://www.axeonmotion.com/
etc. for more info