Mouse scroll wheel & zoom direction
Mouse scroll wheel & zoom direction
(OP)
Anyone know of a way to make the scroll wheel zoom the other way in SW2004? In SW as you roll the wheel back toward you the part gets closer, as you roll the wheel away from you the part gets further away. This would be fine but after the last few years on ACAD which scrolls exactly opposite, it gets a little annoying to the guys who are just switching to SW. I'm just trying to make the transition as easy as possible for everyone. Any suggestions?
Thanks,
mncad
Thanks,
mncad






RE: Mouse scroll wheel & zoom direction
No help, but just some rather comical information.
ADsks...Inventer, scrolls the same as SWX using the wheel...you would think that 2 programs from the same company would scroll the same.
Alan M. Etzkorn

Product Engineer
Nixon Tool Co.
www.nixontool.com
RE: Mouse scroll wheel & zoom direction
SWX, ProE (WildFire), Inventor, and SolidEdge ALL zoom the same way using the mouse wheel.
Acad is the only backwards one.
RE: Mouse scroll wheel & zoom direction
I hve three buttons, don't want the center one to do TWO things anymore. Any suggestions?
Alex
RE: Mouse scroll wheel & zoom direction
Seriously though, isn't this a lot of effort just to avoid a simple reprogramming of an old habit? Or are you still using brand A as well? In which case, does it have a way to reprogram the zoom wheel?
John Richards Sr. Mech. Engr.
Rockwell Collins Flight Dynamics
There are only 10 types of people in the world - those who understand binary and those who don't.
RE: Mouse scroll wheel & zoom direction
Alex
RE: Mouse scroll wheel & zoom direction
John Richards Sr. Mech. Engr.
Rockwell Collins Flight Dynamics
There are only 10 types of people in the world - those who understand binary and those who don't.
RE: Mouse scroll wheel & zoom direction
Alex