[b]Need recommendation for surfaces tutorials[/b]
[b]Need recommendation for surfaces tutorials[/b]
(OP)
Can anyone recommend where to find some good tutorials for "Surfaces" (preferably downloadable from an internet site).... I've done the exercises in the Advanced Part Modeling Training Manual but would like additional training in this area. Or (also) some good reading that discusses the feature of using surfaces.
Thanks for your suggestions.
Thanks for your suggestions.






RE: [b]Need recommendation for surfaces tutorials[/b]
Best way to learn is to use it. I taught myself surfacing in less than a few weeks without any tutorials. If I can do it you can do it.
If your willing to pay for them try looking at www.amazon.com - but those books are just as good as the part modeling book you have now.
Regards,
Scott Baugh, CSWP

http://www.3dvisiontech.com
http://www.scottjbaugh.com
FAQ731-376
RE: [b]Need recommendation for surfaces tutorials[/b]
http://www.dimontegroup.com/Tutorials.htm
http://www.EsoxRepublic.com