Toolbox and NAS fasteners
Toolbox and NAS fasteners
(OP)
Can anyone tell me if Toolbox is setup with NAS fasteners built in and if not when might one find these parts premodeled by NAS Stds?
Thanks...
Thanks...
When was the last time you drove down the highway without seeing a commercial truck hauling goods?
Download nowINTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: Toolbox and NAS fasteners
Toolbox does not have NAS specific fasteners built-in. The best you can do is make a derrived standard from ANSI, and change the designations or add/remove sizes to get a catalog that mimics the NAS standards you want.
There are a few independent CSWPs around making parts, or you could look in the user section of 3D Content Central for the few NAS fasteners that might be there.
DesignSmith
www.DesignSmith-Services.com
RE: Toolbox and NAS fasteners
John Richards Sr. Mech. Engr.
Rockwell Collins Flight Dynamics
There are only 10 types of people in the world - those who understand binary and those who don't.
RE: Toolbox and NAS fasteners
Do you still need NAS fastners?
Macduff
Colin Fitzpatrick
Sr. Mechanical Designer
macduff's SW page
Inhouse System
Pentium(4)2.80GHz
Ram 1.00 GB
SW2005 Office SP 3.1
Windows 2000 SP4.0
NIVIDA Quadro4 750 XGL