How can we change font and arrow sizes on drawings?
How can we change font and arrow sizes on drawings?
(OP)
Is there a way to change all the type fonts and arrow sizes on a drawing page without making 45 to 55 mouse clicks?
We have several thousand drawings to change.
We have several thousand drawings to change.






RE: How can we change font and arrow sizes on drawings?
RE: How can we change font and arrow sizes on drawings?
Regards,
Scott Baugh, CSWP

http://www.3dvisiontech.com
http://www.scottjbaugh.com
FAQ731-376
RE: How can we change font and arrow sizes on drawings?
We appear to have 5,000+ files to update.
RE: How can we change font and arrow sizes on drawings?
I have to do the same. Was thinking a macro might take care of this, but haven't tried that approach yet. Maybe someone out there has...? A basic API perhaps? Not my area of knowledge, so I'm fishing.
Good luck!
RE: How can we change font and arrow sizes on drawings?
John Richards Sr. Mech. Engr.
Rockwell Collins Flight Dynamics
Forget rich and famous - I want to be rich and unknown.
RE: How can we change font and arrow sizes on drawings?
http://swtools.cad.de/download.htm
Look under 'Copy Drawing Options'
RE: How can we change font and arrow sizes on drawings?
RE: How can we change font and arrow sizes on drawings?
Thanks for the link, I had to change security setting in Excel in order to run the macro.
I would also like to thank the author for the great macro.
Thanks again,
Ed Danzer