Properties of different wood pulp fibres?
Properties of different wood pulp fibres?
(OP)
I'm looking for a comprehensive synopsis on anisotropic mechanical properties of different conventional wood pulp fibers. More specifically I would like to know the:
*Longitudinal Young’s modulus of the fibres, E11
*Transverse Young’s modulus of the fibres, E22
*The Poisson ratios: v12, v23
*The shear modulus, G12
This values could either be experimental or calculated. Fibres could be e.g. Liner, Thermo mechanical pulp (TMP), Chemo thermo mechanical (CTMP), Softwood kraft pulp (SKP), Hardwood kraft pulp (HKP), etc.
Any suggestion?
Sincerely,
Cristian Neagu
*Longitudinal Young’s modulus of the fibres, E11
*Transverse Young’s modulus of the fibres, E22
*The Poisson ratios: v12, v23
*The shear modulus, G12
This values could either be experimental or calculated. Fibres could be e.g. Liner, Thermo mechanical pulp (TMP), Chemo thermo mechanical (CTMP), Softwood kraft pulp (SKP), Hardwood kraft pulp (HKP), etc.
Any suggestion?
Sincerely,
Cristian Neagu





RE: Properties of different wood pulp fibres?
Ryszard Szymani, Ph.D.
Director
Wood Machining Institute
P.O. Box 476
Berkeley, CA 94701-0476
Tel: 925-943-5240
Fax: 925-945-0947
Email: szymani@woodmachining.com
www.woodmachining.com