CAD for Stress Engineers?
CAD for Stress Engineers?
(OP)
Any suggestions for a simple and (almost) free CAD program for a stress engineer?
I'm doing 3D geometry modeling using FEA pre-prosessor (femap), but sometimes I need to make 2D-drawings with dimensions etc. In other words, I want to modify geometry so that is does not look like it was made by FEA program...
Thanks!
I'm doing 3D geometry modeling using FEA pre-prosessor (femap), but sometimes I need to make 2D-drawings with dimensions etc. In other words, I want to modify geometry so that is does not look like it was made by FEA program...
Thanks!





RE: CAD for Stress Engineers?
I modeled the tower with staad-3 and then change the geometry by a simple program . then a ".dxf" file will prepared for autocad.