Driving a FET via a micro
Driving a FET via a micro
(OP)
Hi, I'm trying to drive a FET via a micro with PWM (ST7FLITE09).
I'm doing this via a 22R resistor from Port pin to gate. However when I do this the voltage from the micro drops to about 1V and won't turn on the transistor. Any ideas anyone as I am stuck???
I'm doing this via a 22R resistor from Port pin to gate. However when I do this the voltage from the micro drops to about 1V and won't turn on the transistor. Any ideas anyone as I am stuck???





RE: Driving a FET via a micro
Please minimize cross-posting
TTFN
RE: Driving a FET via a micro
Visit
http://www.softec-italia.com/downloads/doc/indart-st7f_...
etc. for more info