Shore Hardness of Zytel and Delrin
Shore Hardness of Zytel and Delrin
(OP)
Anyone out there familiar with the typical Shore Hardnesses and scales for the above stated materials. They will be used as inserts for Extrusion Dies.
TIA
TIA
Alan M. Etzkorn

Product Engineer
Nixon Tool Co.
www.nixontool.com





RE: Shore Hardness of Zytel and Delrin
RE: Shore Hardness of Zytel and Delrin
Delrin homopolymer, unreinforced: 86 Shore D
Zytel 101, unreinforced: 89 Shore D
Regards,
Cory
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
RE: Shore Hardness of Zytel and Delrin
The 2 I am looking for in particular are
Zytel WRF500
&
Delrin 100AL
Thanks for the help so far.
Alan M. Etzkorn

Product Engineer
Nixon Tool Co.
www.nixontool.com
RE: Shore Hardness of Zytel and Delrin
Dupont only has preliminary data for these grades on their Internet site, which does not include Shore hardness. You will need to contact them directly. Good luck.
Regards,
Cory
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.