Paper space
Paper space
(OP)
I have a 3d object that was drawn in model space. I have made a four view layout. Is there a way that you can dimension each view without the dimension appearing in each view?
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: Paper space
Flores
RE: Paper space
RE: Paper space
Flores
RE: Paper space
Use layer control and check "freeze in current viewport"
for the dimentions layers you don't want in any particular
viewport.
RE: Paper space
When I dimension I have the view active. How do I switch to tile mode? Also how do you freeze and control layers
RE: Paper space
Though some disagree, I agree completely with smcadman - model in MS and dimension in PS.
WRT freeze and layer control, on the "Object Properties" toolbar, at the left, is an icon that appears (to me) to be three pieces of white paper stacked on each other. Click that to open up your layer manager (or type "layer").
If you're working in the Model Tab, you'll see that the third column is labeled "Freeze in all VP". That means that you freeze/thaw (for now, just think of it as turning on & off) that layer in any viewport.
If you switch to one of the Layouts, and bring up Layer Manager, you'll find a column which says "Current VP Freeze". That means that the layer will be frozen (off) in the current viewport but visible in all other viewports. That enables you to show entities or dims or whatever only in one viewport but not in the others. (They will ALL be visible in the Model Tab unless you freeze them there in which case they will also be frozen in all the other viewports).