×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Educational Decisions, Please Help

Educational Decisions, Please Help

Educational Decisions, Please Help

(OP)
Currently I am completing a 3 year Canadian, (ON) College course in Civil Engineering Technology, personaly i feal that being a technologist isn't enough for me, espcially in the structural field, but being in depth of over $25 000 (can) I find myself stuck between going to University for four year and increasing my dept to (70 000) or ending at a technologist job.  Any suggestion would be greatly appriated

Thanks

RE: Educational Decisions, Please Help

If you are able, my advice would be to continue on with the goal of a four-year engineering degree.

Ultimately, you will make the money to pay off the loan and then some.  However, if you stop now you will forever be blaming yourself later for not at least trying.

RE: Educational Decisions, Please Help

Hi,
I personnally encourage you to continu on with your studies, for at the university level you'll discover a whole new depth of what your studying at the moment, and maybe even discover a specialisation that really interests you.
Moneywise, once you have your BA degree, its alot easier to apply for jobs in the US, where you have bigger salaries.
Anyway, thats my personnal opinion, But I do wish you all the luck.

RE: Educational Decisions, Please Help

70,000 dollars is nothing over the amount of time you spend in your career.  If that is all that is stopping you from getting your 4 year degree...think of it this way how much is a nice new car...and how long does that last?

RE: Educational Decisions, Please Help

Depending on your circumstances, another option to consider is going to work for someone in your desired field as a field technician or maybe cad operator, and then taking advantage of tuition reimbursement to finish your studies in engineering.  Most larger firms, and many small ones, have some sort of tuition reimbursement program.  An added plus is that your studies become easier when you can see practical applications of theories on a daily basis.

RE: Educational Decisions, Please Help

Education is power.  Go for the 4 yr. degree.  Also, when you go to the 4 yr. school, you will have a leg up on other students because you obtained valuable practical experience.  Also, I dont know what the lisencing laws are in Can, but perhaps you cannot become PE without BS.

However, you can always start working now, get your foot in the door, and with hard work and dedication, move right up.

RE: Educational Decisions, Please Help

Your desire to achieve in the field of Civil Engineering Technology is admirable.

I am a licensed Professional Engineer (Civil) in the state of Oregon in the United States. I began my career in 1977 doing manual structural drafting using a parallel bar, triangles, lead holder pencils, lead sharpner, and a scale. I have  worked under the direction of a gradutate from a civil engineering technology program who is now a well respected structural engineer practicing in Oregon and also licensed in California and Washington, USA. I was able to take the required Fundamentals of Engineering Examination in Oregon based on experience without a BS degree in Civil Engineering. I was mentored by civil and structural engineers as an engineer in training for a number of years. While I was drafting and designing, I enrolled in a civil engineering program at Portland State University, Portland, Oregon, USA. When I had completed a number of "core" and design courses and had enough experience approved by the state engineering board, I wrote the professional exam and passed. I became licensed and a few months later I graduated with a BS degree in Civil Engineering. I believe that eduation through course work is an essential part of becoming a Civil Engineer, whether you design highways, bridges, water treatment plants and distribution systems, wastewater treatment plants and collection systems, building structures, or any other engineering area in which you achieve competence. I also believe working under the direction of a competent engineering is also necessary to gain experience.

I have work for "academic" engineers and found them lacking "real world" experience. Engineers who offer services coming directly from an academic institution without knowing how to put a set of construction documents together should be prevented from practiceing engineering.

None the less, I believe Civil Engineering is a noble profession and ranks with doctors of medicine, attorneys, and architects.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources