great pro/E vrs Solidworks article
great pro/E vrs Solidworks article
(OP)
http://www.cadcamnet.com
These guys like to charge for their articles but the first one is free. So check this one out about the surfacing abilities of Pro/E compared to Solidworks. Their articles are usually to short to be worth buying. Yet, this one is actually a pretty good review with a detailed and accurate comparison of what you can do.
These guys like to charge for their articles but the first one is free. So check this one out about the surfacing abilities of Pro/E compared to Solidworks. Their articles are usually to short to be worth buying. Yet, this one is actually a pretty good review with a detailed and accurate comparison of what you can do.
ProEpro
www.whitelightdesign.com





RE: great pro/E vrs Solidworks article
Wayne
RE: great pro/E vrs Solidworks article
Here is the link for the free trail. It is on the upper right hand of the main screen
ProEpro
www.whitelightdesign.com
RE: great pro/E vrs Solidworks article
RE: great pro/E vrs Solidworks article
You also have to look at what the justice department would say if there were only 2 competitors. It would depend on the market share of each plus maybe AutoDesk, cause there isn't anyone else with any significant market share to even speak about.
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
RE: great pro/E vrs Solidworks article
RE: great pro/E vrs Solidworks article